Mach5 60oz (F10X-CV)

Home » Mach5 60oz (F10X-CV)

Mach5 60oz (F10X-CV)

Capacity: This machine will produce up to 1,200 small one ounce serving bags per hour (60 one ounce serving bags per popping cycle)

Mach5 Stir Blade

#20818

Located inside of the kettle and works to agitate the corn into popped product. Can be damaged / bent to unusable condition over time from lack of cleaning.

Stir Blade Retaining Pin

#19991

Located inside of the kettle and works to secure the stir blade to the agitator shaft. Removed every night when the stir blade is cleaned, so can be misplaced and lost in this cleaning process.

Clutch Dog, Inverted

#20783

Located inside of the kettle and works to connect the stir blade to the agitator drive shaft. Will need to be removed every night when the stir blade is cleaned.

Square Head Screw

#1114

1/4-20 x 3/8″ Nickel Plated Screw

Located at the top of the shaft connector. Must be removed to be able to remove the cover from the kettle.

Spring

#1991

0.125” Pitch, 0.036” Wire Diameter

Located inside of the shaft connector, this spring works to engage the stir blade to the agitator shaft.

Cover Retaining Spring

#1471

Located on top of the kettle cover and helps to keep the cover on while popping. Can often be misplaced during the cleaning / removal process.

Oil Discharge Tube, Assembly

#1089-ASSY

Delivers the Oil from Pump Tubing and Discharges the Oil into the Kettle. Can often be damaged due to location within the kettle.

Filters, Pack of 5

#14132-5

Sixe: 9” x 12”

Consistent replacement of this disposable filter is recommended to prevent grease build-up within this popper cabinet, and maximize efficiency of your popper.

Mach5 60oz (F10X-CV)