Located inside of the kettle and works to agitate the corn into popped product. Can be damaged / bent to unusable condition over time from lack of cleaning.

Located inside of the kettle and works to secure the stir blade to the agitator shaft. Removed every night when the stir blade is cleaned, so can be misplaced and lost in this cleaning process.

Located inside of the kettle and works to connect the stir blade to the agitator drive shaft. Will need to be removed every night when the stir blade is cleaned.

1/4-20 x 3/8″ Nickel Plated Screw

Located at the top of the shaft connector. Must be removed to be able to remove the cover from the kettle.

0.125” Pitch, 0.036” Wire Diameter

Located inside of the shaft connector, this spring works to engage the stir blade to the agitator shaft.

Located on top of the kettle cover and helps to keep the cover on while popping. Can often be misplaced during the cleaning / removal process.

Delivers the Oil from Pump Tubing and Discharges the Oil into the Kettle. Can often be damaged due to location within the kettle.

Sixe: 9” x 12”

Consistent replacement of this disposable filter is recommended to prevent grease build-up within this popper cabinet, and maximize efficiency of your popper.